This Mercedes-Maybach S680 Brabus, with custom carbon fibre work all around the car, was protected with premium paint protection film at Apex Detail Studio in Dubai. We used a precut application to cover every panel, then extended custom cuts onto the carbon fibre sections for complete coverage. Full body PPF starts from AED 12,000 for sedans and AED 13,500 for SUVs and trucks, depending on options, before 5% VAT.
Jump to section · 11 parts
- What was done to this Maybach S680 Brabus?
- Why protect a Maybach S680 Brabus with PPF?
- How was the S680 prepared?
- How was the film installed around the carbon fibre?
- Watch the full Maybach S680 Brabus PPF build
- How did the S680 look when it was finished?
- What makes PPF on carbon fibre different?
- How do you look after a Maybach after PPF?
- How much does Maybach PPF cost in Dubai?
- What our PPF customers say
- Frequently asked questions
Job card
- Car: Mercedes-Maybach S680 Brabus, burgundy with carbon fibre kit.
- Service: Premium paint protection film, precut on all panels.
- Also: custom cuts extended onto the carbon fibre sections.
- Prep: foam wash and full preparation.
- Where: Apex Detail Studio, Al Quoz, Dubai.
Get a Maybach PPF quote
Send your Mercedes or Maybach model on WhatsApp, and the team will reply with film options and a quote.
What was done to this Maybach S680 Brabus?
Every painted panel of the S680 Brabus was covered with premium precut film, and custom cuts were extended onto the Brabus carbon fibre so it is protected too.
With carbon fibre all around the car, getting complete coverage was the challenge on this build. For other S-Class work, see the Mercedes S500 full body PPF and the Maybach S580 window tint.
Why protect a Maybach S680 Brabus with PPF?
The S680 Maybach Brabus sits at the very top of the S-Class range, and this one carries a custom carbon fibre kit all around the car. That combination is expensive to repair in two different ways. The burgundy paint is a deep, layered finish that needs specialist blending after a chip, and the carbon fibre parts are often replaced rather than repaired when the clear coat on top of the weave is damaged.
Clear film protects both. On the painted panels it takes stone chips and wash marks, and on the carbon it shields the clear coat from scratches and the UV that can dull and yellow exposed carbon over time in the Dubai sun. The carbon work made this car a real challenge to cover completely.
How was the S680 prepared?
The car was foam washed and hand washed, including the Brabus badges, grille and carbon parts, before moving into the PPF bay.
Step by step on this Mercedes-Maybach S680 Brabus
These stills come from the full build video further down the page, so every photo shows this exact car in our Al Quoz studio.
How was the film installed around the carbon fibre?
The precut panels went on first, then custom cuts were made to carry the film onto the carbon sills, mirrors and diffuser. Edges were heat set and finished by hand.
Step by step, this is how the film went on:
Step by step on this Mercedes-Maybach S680 Brabus
These stills come from the full build video further down the page, so every photo shows this exact car in our Al Quoz studio.
Watch the full Maybach S680 Brabus PPF build
The video follows the S680 Brabus from the wash bay through the film installation.
How did the S680 look when it was finished?
The S680 Brabus kept its deep burgundy gloss and carbon detail, now protected all round.
Inside the cabin
Interior trim of the same S680.
What makes PPF on carbon fibre different?
Factory precut patterns are made for standard body panels, not for aftermarket carbon parts. On this S680, the team used precut film for every standard panel and then extended custom cuts onto the carbon sections, shaping the film around the extra vents, lips and edges by hand. The aim is the same as on paint: full coverage with edges that sit out of sight.
How do you look after a Maybach after PPF?
- Wait about a week before the first wash.
- Hand wash with a pH neutral shampoo, including the carbon parts, and avoid brush washes.
- Remove sand and bird droppings quickly in summer.
- Keep pressure washer nozzles away from film edges, especially around the carbon trim.
Weighing film against coating for a car like this? Read PPF vs ceramic coating and is premium PPF worth it.
How much does Maybach PPF cost in Dubai?
Full body PPF starts from AED 12,000 for sedans and AED 13,500 for SUVs and trucks, depending on options, before 5% VAT. Cars with carbon kits need extra custom work, so the team quotes after seeing the car. Send your car details on WhatsApp. See also our Maybach detailing page.
What our PPF customers say
Frequently asked questions
What did Apex Detail Studio do to this Maybach?
We fitted premium precut film to every panel and extended custom cuts onto the Brabus carbon fibre.
Can PPF go on carbon fibre?
Yes. Film protects carbon fibre from chips and UV and keeps its finish.
Why use precut film?
Precut patterns fit each panel exactly, so no blade is used on the paint.
How much is Maybach PPF in Dubai?
Full body PPF starts from AED 12,000 for sedans and AED 13,500 for SUVs and trucks, depending on options, before 5% VAT. Carbon kits are quoted after inspection.
How long does PPF take on an S-Class?
Usually a few days. The team confirms timing with your quote.
