This red Ferrari 458 Spider came to Apex Detail Studio in Dubai for full-body paint protection film. We covered every painted panel, worked the film around the engine cover vents, badges and intakes, and cleaned the wheels and calipers before handover. Full PPF for sedans and coupes starts from AED 12,000, depending on options, before 5% VAT.
Jump to section · 9 parts
- What did we do to this Ferrari 458 Spider?
- Why does a 458 Spider need full PPF?
- How did we fit the film on the 458 Spider?
- Watch the full Ferrari 458 Spider build
- What does the finished 458 Spider look like?
- How much does Ferrari 458 PPF cost in Dubai?
- How do you care for a Ferrari with PPF?
- What our PPF customers say
- Frequently asked questions
Job card
- Car: Ferrari 458 Spider, red, tan interior.
- Service: full-body paint protection film.
- Film: premium gloss, self-healing PPF.
- Details: engine cover vents, intakes, badges and front boot area covered.
- Finish: wheels and calipers cleaned before handover.
- Where: Apex Detail Studio, Dubai.
The 458 Spider is the last of Ferrari’s naturally aspirated mid-engined V8 convertibles, which makes it a car owners plan to keep. Its low nose, deep side intakes and sculpted rear deck look stunning in red, and they are exactly the areas that collect stone chips on Dubai roads.
If you are looking at Ferrari 458 PPF in Dubai, this build shows the full job, with every photo taken from the video further down the page.
Want your Ferrari protected?
Send your model and year on WhatsApp and the team will reply with film options and a quote.
What did we do to this Ferrari 458 Spider?
We covered the whole car in premium gloss paint protection film. Gloss film is clear and self-healing, so the red paint keeps its depth while the film takes the chips and scratches instead.
| Area | Risk on a 458 Spider | What we did |
|---|---|---|
| Nose, bonnet and front wings | Stone chips at speed | Full film, stretched over the curves |
| Side intakes | Grit thrown up by the front tyres | Film worked into the intakes |
| Engine cover and rear deck | Heat, sun and dust | Film fitted around the vents |
| Rear bumper and lights | Debris from following traffic | Full film, edges tucked |
| Wheels and calipers | Brake dust and grime | Cleaned before handover |
Why does a 458 Spider need full PPF?
Because red Ferrari paint is expensive to repair and hard to match perfectly. A repainted panel on a collectible car also affects its value. Full PPF keeps every panel original, and light marks in the film fade with heat from the sun.
On a convertible, the rear deck and engine cover get as much sun as the bonnet, so they need covering too. Our sports car PPF guide explains which areas matter most.
How did we fit the film on the 458 Spider?
- Preparation. The car was washed and decontaminated so nothing was trapped under the film.
- Large panels. Bonnet, wings, doors and rear deck were laid with large pieces to keep seams to a minimum.
- Vents and intakes. Film was worked around the engine cover vents and into the side intakes by hand.
- Badges. The prancing horse, the Scuderia shields and the Ferrari lettering were wrapped neatly.
- Front boot area. The edges around the front boot were finished with the boot open.
- Wheels and final check. Wheels and calipers were cleaned, and every panel was inspected before handover.
Our precut vs hand-cut PPF guide explains how we fit film without blade work on the paint.
Step by step on this 458 Spider
These stills come from the build video, so every photo shows this exact car.
Watch the full Ferrari 458 Spider build
The full job on our YouTube channel.
What does the finished 458 Spider look like?
Exactly like a red 458 Spider should, glossy and clean, with the film invisible over the paint.
How much does Ferrari 458 PPF cost in Dubai?
Full-body PPF at Apex starts from AED 12,000 for sedans and coupes, depending on options, before 5% VAT. A supercar like the 458 Spider is confirmed after inspection. Our PPF cost guide explains what affects the price, and our Ferrari PPF guide covers the whole range. For a closed-roof sibling, see our Ferrari 488 full PPF build, and for film plus tint, the Ferrari Roma Spider.
How do you care for a Ferrari with PPF?
- Wait about a week before the first wash so the film can settle.
- Hand wash with a pH-neutral shampoo and two buckets.
- Keep pressure-washer nozzles away from film edges.
- Remove bird droppings and bugs quickly.
- Avoid brush car washes.
What our PPF customers say
Frequently asked questions
What did Apex Detail Studio do to the Ferrari 458 Spider?
We covered the red 458 Spider in full-body premium gloss paint protection film, worked the film around the vents, intakes and badges, and cleaned the wheels and calipers before handover.
Does PPF change the look of red Ferrari paint?
No. Gloss film is clear, so the red keeps its depth and shine.
Which parts of a 458 Spider chip the most?
The nose, bonnet, front wings, side intakes and the area ahead of the rear wheels.
Do you cover the engine cover on a Spider?
Yes. On this car the engine cover and rear deck were filmed, with the film fitted around the vents.
How long does full PPF take?
Full-body PPF generally takes two to three days in the studio.
How much does Ferrari 458 PPF cost in Dubai?
Full-body PPF starts from AED 12,000 for sedans and coupes, depending on options, before 5% VAT.
How do I book my Ferrari in at Apex?
Send your car details on WhatsApp to +971 58 549 2739. Our studio is at 6A Street, Al Quoz Industrial 3, Dubai.
