Rolls-Royce Cullinan Paint Correction and Ceramic Coating in Dubai

This black Rolls-Royce Cullinan received a 3-step paint correction, a ceramic coating and a full interior detail at Apex Detail Studio in Dubai. The correction removed swirl marks, light scratches and imperfections, then the coating sealed in the gloss against UV, contaminants and water spots. Ceramic coating and correction are quoted per car, so send your car details on WhatsApp for a price.

What was done to this Rolls-Royce Cullinan?

The Cullinan had a 3-step paint correction, a ceramic coating over every painted panel, and a full interior detail.

Black paint shows every swirl and wash mark, and a car this size has a lot of it. The goal was to bring back full clarity and depth, then protect it so the finish stays easy to keep clean in Dubai conditions.

How was the paint corrected and coated?

The paint was corrected in three stages, panel by panel, with trim and lights masked off. Once the defects were removed, the surface was wiped down and the ceramic coating was applied in small sections, levelled and buffed.

Step by step, this is how the paint was done:

Step by step on this Rolls-Royce Cullinan

These stills come from the full build video further down the page, so every photo shows this exact car in our Al Quoz studio.

What does ceramic coating do for a Cullinan?

Ceramic coating adds a hard, glossy layer on top of the clear coat. It resists UV, bird droppings, tree sap and water spotting, and dirt washes off more easily.

Coating does not stop stone chips. For that, paint protection film is the answer, and coating can go on top of the film. See our Rolls-Royce Cullinan paint protection article.

What happened inside the cabin?

The interior received a full detail. Leather seats, door cards, the dashboard, the boot and the tailgate seats were cleaned and refreshed by hand.

Inside the cabin

The black and red cabin detailed on the same car.

Watch the full Rolls-Royce Cullinan detail

The video follows the interior detail, the paint correction and the ceramic coating, ending with the finished Cullinan.

How did the Cullinan look when it was finished?

The Cullinan left with deep, clear black paint and a fresh cabin. For other Rolls-Royce jobs, see the Rolls-Royce Ghost two-tone PPF and the Rolls-Royce Wraith dry ice clean.

How much does ceramic coating cost in Dubai?

Paint correction and ceramic coating are priced per car, because the time depends on the size of the car, the condition of the paint and the coating chosen. Send your car details on WhatsApp for a quote. If you want stone chip protection too, full body PPF starts from AED 11,000 depending on the film, before 5% VAT.

How do you look after a ceramic coated Cullinan?

Hand wash with a pH neutral shampoo and clean wash mitts, dry with soft towels, and avoid automatic car washes with brushes. Remove bird droppings quickly in the Dubai heat. A maintenance wash keeps the coating working at its best. Read more about ceramic coating on another car we did.

Frequently asked questions

What did Apex Detail Studio do to this Cullinan?

We carried out a 3-step paint correction, applied a ceramic coating to the paint and gave the interior a full detail.

What is a 3-step paint correction?

It is machine polishing in three stages, from cutting to refining, to remove swirl marks, light scratches and haze before any coating goes on.

Does ceramic coating protect against stone chips?

No. Ceramic coating protects against UV, contaminants and water spots. For stone chips you need paint protection film.

Can ceramic coating go on top of PPF?

Yes. Many owners coat the film as well, which makes it easier to clean.

How much is ceramic coating for a Rolls-Royce in Dubai?

It is priced per car. Send your car details and a few photos on WhatsApp for a quote.

Was the interior cleaned too?

Yes. The seats, door cards, dashboard, boot and tailgate seats were cleaned and refreshed by hand.