Skip to content Skip to footer

Gtechniq Ceramic Coating in Dubai

Apex Detail Studio is a Gtechniq-accredited ceramic coating studio in Al Quoz, Dubai. A Gtechniq ceramic coating is a liquid coating that bonds to your car’s clear coat and cures into a hard, glossy, water-repellent layer. It gives a deep wet-look shine, makes dust and grime easier to wash off, and helps protect paint from UV, bird droppings and water spots. Gtechniq’s flagship coating, Crystal Serum Ultra, is rated for up to 9 years of protection when applied by an accredited installer and maintained correctly.

Want a ceramic coating quote? WhatsApp us your model and its condition, and the team will recommend the right coating.

What does a Gtechniq coating do for your car?

  • Deep, wet-look gloss that lasts far longer than wax.
  • Hydrophobic surface: water beads and rolls off, taking dust with it.
  • Easier washing: sand and grime release with less rubbing, which means fewer swirls.
  • UV and chemical resistance to slow fading and etching.
  • Long life: years of protection rather than weeks.

A ceramic coating does not stop stone chips. For impact protection, combine it with PPF. See PPF vs ceramic coating.

Why choose Apex for ceramic coating?

Gtechniq accredited Trained installers using Gtechniq’s professional-only coatings
Proper preparation Decontamination and paint correction before every coating
Controlled curing Coating applied and cured indoors in our Al Quoz studio
Typical turnaround Around 2 to 3 days, depending on correction needed

Our ceramic coating process

  1. Wash and decontamination: snow foam, hand wash, iron and tar removal, clay.
  2. Paint inspection: under strong lighting to see every swirl.
  3. Paint correction: the coating locks in the finish underneath, so defects are polished out first.
  4. Panel wipe: removes polishing oils so the coating bonds properly.
  5. Application: panel by panel, levelled carefully.
  6. Curing and inspection before handover with aftercare advice.

Read more in how paint is prepared before ceramic coating.

Black BMW saloon after Gtechniq Ultra Ceramic coating at Apex Detail Studio Dubai

Price your coating
Send your model and a few photos on WhatsApp and the team will reply with a quote.

Get a quote on WhatsApp

Choosing your Gtechniq coating

Coating Best for
Crystal Serum Ultra (flagship) Maximum gloss and longest protection, up to 9 years
Crystal Serum Light Strong protection and gloss at a lower price point
EXO top coat Extra slickness and water beading over the base coating
Wheel, glass and interior coatings Easier cleaning of wheels, better visibility in rain, protected fabric and leather

See it on a real car: BMW with Gtechniq Crystal Serum Ultra.

Looking after a coated car in Dubai

  • Hand wash with a pH-neutral shampoo, rinsing sand off first.
  • Avoid automatic brush washes.
  • Dry the car instead of letting water evaporate in the sun.
  • Book a maintenance check to keep the coating performing.

Our guide on washing a ceramic-coated car explains more, and how long ceramic coating lasts in Dubai covers durability.

Frequently asked questions

Is ceramic coating worth it in Dubai?

Yes, for most owners. It makes frequent washing easier and safer and keeps the gloss for years in strong sun.

Does ceramic coating prevent scratches?

It resists light marring, but it will not stop stone chips or deep scratches. Read about the 9H hardness myth.

Can I coat a matte or PPF-protected car?

Yes, with suitable products. See can matte and satin cars be ceramic coated.

How much does Gtechniq ceramic coating cost?

It depends on the coating, the car’s size and the correction needed. WhatsApp +971 58 549 2739 for a quote.

Get your Gtechniq coating quote

Tell us your car and its condition, and we will recommend the right coating.

WhatsApp ApexCall +971 58 549 2739