A Tesla Cybertruck came to Apex Detail Studio for full-body paint protection film, which protects its unique stainless steel exterior from everyday wear while keeping the finish looking sharp. The Cybertruck has no paint on its body panels, so marks on the bare stainless steel are hard to hide and harder to correct than on a painted car.
Jump to section · 8 parts
- What was done to this Tesla Cybertruck?
- Why put PPF on stainless steel?
- How did Apex Detail Studio protect the Cybertruck?
- Why were three Cybertrucks in the studio at once?
- How much does PPF cost for a Tesla Cybertruck in Dubai?
- How should a filmed Cybertruck be looked after?
- Frequently asked questions
- Bring your Cybertruck to our Al Quoz studio
A clear film takes scratches, scuffs and stone hits instead. Full-body PPF at Apex starts from AED 13,500 for SUVs and trucks, depending on options, before 5% VAT, and a vehicle this size is confirmed after inspection.
Job card
- Car: Tesla Cybertruck, brushed stainless steel.
- Service: full-body PPF.
- Finish: clear film, keeping the stainless look.
- Also in the studio: three Cybertrucks at once.
- Where: Apex Detail Studio, Al Quoz, Dubai.
Own a Cybertruck? WhatsApp us your model and the team will reply with a PPF quote for your truck.
The Cybertruck looks like nothing else on Dubai roads, and that is exactly why owners want to keep it looking that way. Its flat, angular panels are made of unpainted stainless steel, so there is no clear coat between the metal and the world.
That changes the protection question. On a painted car, light scratches can often be polished out. On brushed stainless, a deep scratch or scuff is far harder to blend back in. This is how we approached a full-body PPF on one, and why three of them ended up in the studio together.
What was done to this Tesla Cybertruck?
The truck received full-body clear PPF over its exterior panels, protecting the stainless steel while keeping its distinctive look.
| Area | Risk on a Cybertruck | What the film does |
|---|---|---|
| Front and bonnet | Stone hits and sand at highway speed | Takes the impact instead of the steel |
| Doors and sides | Car park scuffs, bags, fingerprints | Adds a cleanable layer over bare metal |
| Lower panels | Grit thrown up by the tyres | Absorbs abrasion low down |
| Rear and tailgate | Loading and everyday use | Guards the surface around the bed |
Get a Cybertruck PPF quote
Send your model and a few photos on WhatsApp and the team will reply with a quote.
Why put PPF on stainless steel?
Because stainless steel is tough, but it is not mark proof. It resists rust, yet it still scratches, scuffs and shows fingerprints, and there is no paint or clear coat to absorb light damage. Correcting a mark means working the metal grain itself, which is specialist work.
A clear film puts a sacrificial layer on top. Light swirls in the film heal with heat, fingerprints wipe off more easily, and the original steel underneath is left untouched. For more on film choices, including colour, see our Cybertruck PPF guide.
How did Apex Detail Studio protect the Cybertruck?
- Inspection. We checked the panels, edges and any existing marks and recorded them before work began.
- Deep clean and decontamination. The steel was cleaned thoroughly so nothing was trapped under the film.
- Pattern preparation. Patterns were planned for the Cybertruck’s large flat panels and sharp edges.
- Film installation. Each panel was covered, with edges wrapped wherever it was safe to do so.
- Final inspection. Every edge and seam was checked under studio lighting before handover.
Our installation process guide explains each stage in more detail.
Step by step on this Tesla Cybertruck
Stills from our own footage of this Tesla Cybertruck job at the Al Quoz studio, in the order the work was done.
Why were three Cybertrucks in the studio at once?
The Cybertruck is still a new and unusual vehicle, and owners tend to look for a studio that already knows it. Its large flat panels, sharp creases and unusual materials reward experience, so it helps when the team has handled several before.
Protecting and transforming a Cybertruck pays off when the team gets the details right.
How much does PPF cost for a Tesla Cybertruck in Dubai?
Full PPF for SUVs and trucks starts from AED 13,500 depending on options, before 5% VAT. The Cybertruck is a large vehicle, so the final figure is confirmed after inspection. Colour PPF is quoted per car.
Our PPF cost guide explains what affects the price.
How should a filmed Cybertruck be looked after?
- Hand wash with a pH-neutral shampoo, rinsing sand off before touching the panels.
- Keep pressure-washer nozzles away from film edges.
- Avoid abrasive polishes and harsh degreasers on the film.
- Wipe fingerprints with a clean microfibre and a gentle quick detailer.
- Book periodic inspections of film edges.
If you also want to cut cabin heat under that large glass roof, see the best tint for Teslas.
Frequently asked questions
What did Apex Detail Studio do to the Tesla Cybertruck?
The truck received full-body clear PPF at our Al Quoz studio. The film protects the stainless steel exterior from everyday wear while keeping the finish looking sharp.
Does a stainless steel Cybertruck need PPF?
Stainless steel resists rust but still scratches, scuffs and shows fingerprints, and there is no clear coat to absorb light damage. PPF adds a sacrificial layer that takes those marks instead of the metal.
Does clear PPF change how a Cybertruck looks?
A clear film keeps the stainless look. If you want a different colour or finish, colour PPF is another option and is quoted per car.
How much does Cybertruck PPF cost in Dubai?
Full PPF for SUVs and trucks starts from AED 13,500 depending on options, before 5% VAT. The Cybertruck is confirmed after inspection.
Can PPF be removed from a Cybertruck later?
Yes. A professional installer can remove the film, leaving the stainless steel underneath as it was when the film went on.
How do I book my Cybertruck in at Apex?
Send your truck’s details on WhatsApp to +971 58 549 2739. We will arrange an inspection at our studio in Al Quoz Industrial 3.
Bring your Cybertruck to our Al Quoz studio
Tell us how you use your truck and we will recommend clear or colour film and the right coverage.
WhatsApp ApexCall +971 58 549 2739
Apex Detail Studio, 6A Street, Al Quoz Industrial 3, Dubai · Saturday to Thursday, 10am to 7pm
From our reel on Instagram, 13 September 2026.
