Tesla Model Y Performance Stealth PPF in Dubai: Gloss White to Satin

This white Tesla Model Y Performance came into Apex Detail Studio in its factory gloss finish and left in satin, with stealth paint protection film across the entire car. The film changes the look from gloss to a low-sheen satin while protecting every painted panel from stone chips, scratches and road wear. Full-body PPF at Apex starts from AED 11,000 depending on the film, before 5% VAT. If you want Tesla stealth PPF in Dubai, this build shows every stage on the exact car.

What was done to this Tesla Model Y Performance?

Every painted panel was covered with stealth paint protection film, a satin-finish film that turns gloss paint into a soft, low-sheen look. The car also had window film fitted, which you can see being heat-shaped on the glass in the video.

The result is a Model Y Performance that looks completely different from the standard car on the road, with a protective layer over the paint that takes the knocks instead of the clear coat. For the newer Juniper in satin grey, see our Tesla Model Y Juniper XPEL Stealth PPF build.

Why choose stealth PPF on a white Tesla?

Stealth PPF gives a white Tesla a satin finish without repainting or wrapping it in vinyl. The colour stays the factory white, but the finish becomes flat and smooth, which suits the clean lines of the Model Y.

Unlike a colour wrap, the film is a paint protection product first. It absorbs stone chips on the motorway, resists light scratches from washing and car park contact, and helps the paint stay protected from Dubai sun and sand. Because it is a film, the satin look is reversible: the factory gloss is still underneath. For more on satin films, read our guide on protecting matte and satin finishes.

How did Apex Detail Studio wrap the Model Y Performance?

We wrapped the car panel by panel, with edges tucked wherever the body allows so the satin film finishes out of sight.

1. Inspection and wash. The paint was washed and checked before any film went on.
2. Panel preparation. Each panel was cleaned and prepared so the film bonds evenly.
3. Film installation. Stealth film was laid with slip solution, positioned, then squeegeed out panel by panel.
4. Edges and details. Bonnet, door and boot edges were wrapped, and the film was trimmed around the light bar, tail lights and bumpers.
5. Final inspection. The satin finish was checked across the whole car under studio lighting before handover.

Our installation process guide explains each stage in more detail.

Step by step on this Model Y Performance

These stills come from the full build video further down the page, so every photo shows this exact car in our Al Quoz studio.

Was window film also fitted?

Yes. The video shows window film being heat-shaped on the glass and fitted from inside the car, alongside the stealth PPF.

Shaping the film with a heat gun before fitting lets it follow the curve of the glass so it sits flat with no fingers or bubbles at the edges. In a Dubai summer, good window film makes a real difference to cabin comfort. See our Tesla Model 3 window tint job for another example.

Watch the full Model Y Performance build

The full job on our YouTube channel, from the car arriving in gloss white to the satin reveal in the studio.

How much does stealth PPF cost on a Tesla Model Y in Dubai?

Full-body PPF at Apex starts from AED 11,000 depending on the film, before 5% VAT, and satin or stealth film adds a small premium over gloss.

The final price depends on the film and how much of the car you cover. Send your Tesla details on WhatsApp and the team will reply with options and a quote. Our PPF cost guide for Dubai breaks down what affects the price.

How do you care for a Tesla with stealth PPF?

Hand wash with a pH-neutral shampoo and avoid waxes, polishes or glossy sprays, which can leave shiny patches on a satin film.

Rinse sand and dust off before touching the paint, use clean microfibre towels, and keep automatic brush washes away from the car. Bird droppings and tree sap should come off quickly in the Dubai heat. A satin-safe ceramic coating on top of the film makes cleaning even easier; see our Tesla Model Y ceramic coating article.

Frequently asked questions

What did Apex Detail Studio do to this Tesla Model Y Performance?

We fitted full-body stealth PPF, turning the factory gloss white to a satin finish while protecting every painted panel. Window film was also fitted.

Does stealth PPF change the colour of a Tesla?

No. The colour stays the factory colour. Stealth film only changes the finish from gloss to satin.

Is stealth PPF removable?

Yes. The film can be removed professionally, and the original gloss paint is underneath.

How much does stealth PPF cost on a Model Y in Dubai?

Full-body PPF at Apex starts from AED 11,000 depending on the film, before 5% VAT, and satin film adds a small premium. Send your car details on WhatsApp for a quote.

Can I take a Tesla with stealth PPF through a car wash?

Hand washing is best. Avoid brush car washes and glossy waxes, which can mark a satin finish.

Does PPF affect Tesla cameras and sensors?

No. Film is trimmed around cameras and sensors so they keep working normally.