This black 2024 Audi RS6 Performance was protected with paint protection film at Apex Detail Studio in Dubai. The car was washed, decontaminated and polished first, then filmed panel by panel, including the bonnet, wings, gloss black trims and rear. Full body PPF starts from AED 12,000 for sedans and AED 13,500 for SUVs and trucks, depending on options, before 5% VAT.
Jump to section · 11 parts
- What was done to this Audi RS6 Performance?
- Why put PPF on a black RS6 Performance?
- How was the RS6 prepared?
- How was the film installed?
- Watch the full Audi RS6 PPF build
- How did the RS6 look when it was finished?
- Why film the gloss black trims?
- How do you look after an RS6 after PPF?
- How much does RS6 PPF cost in Dubai?
- Frequently asked questions
- Protect your Audi
Job card
- Car: 2024 Audi RS6 Performance Avant, black with blue calipers.
- Service: paint protection film.
- Prep: wash, decontamination and machine polishing.
- Also: gloss black pillar and window trims filmed.
- Where: Apex Detail Studio, Al Quoz, Dubai.
Get an RS6 PPF quote
Send your Audi model and year on WhatsApp, and the team will reply with film options and a quote.
What was done to this Audi RS6 Performance?
The RS6 was washed, decontaminated and polished, then covered in paint protection film panel by panel, including its gloss black trims.
Black paint and gloss black trim show swirls and chips quickly, and a fast estate like the RS6 covers a lot of highway miles. Read our guide to Audi RS PPF in Dubai.
Why put PPF on a black RS6 Performance?
The RS6 Avant is a family estate with supercar pace, and it gets used every day. That means highway miles, school runs and tight car parks, all of which mark the paint. The wide front arches and the low, aggressive front bumper take most of the stone chips, and on black paint each one shows as a bright speck in the sun.
Clear PPF protects the paint from those chips and from the fine swirls that come from regular washing. Its self healing top coat lets light marks fade with heat, so the black keeps its deep, wet look. This car was machine polished before filming, so the film sealed in a corrected, swirl free finish rather than locking in old marks.
How was the RS6 prepared?
The car was washed, the roof cleaned from the platform, the paint decontaminated and dried, then machine polished so the film goes onto a clean, glossy surface.
Step by step on this Audi RS6 Performance
These stills come from the full build video further down the page, so every photo shows this exact car in our Al Quoz studio.
How was the film installed?
Film was laid on the bonnet, wings, pillars and rear, shaped with heat around the lights and finished at the edges.
Step by step, this is how the film went on:
Step by step on this Audi RS6 Performance
These stills come from the full build video further down the page, so every photo shows this exact car in our Al Quoz studio.
Watch the full Audi RS6 PPF build
The video follows the RS6 from the wash bay through polishing and film installation.
How did the RS6 look when it was finished?
The RS6 kept its deep black gloss with protected trims and clean edges.
Why film the gloss black trims?
Piano black pillar and window trims look great when new, but they scratch more easily than painted panels, often from nothing more than a wash mitt or a seatbelt buckle. On this RS6 the gloss black pillar and window trims were filmed as well, so they stay as glossy as the paint. Our Audi RS PPF guide covers trim protection in more detail.
How do you look after an RS6 after PPF?
- Wait about a week before the first wash so the film can settle.
- Use the two bucket method and a pH neutral shampoo, and avoid brush car washes.
- Rinse off sand and bird droppings quickly in summer.
- Keep pressure washer nozzles away from film edges.
- Consider ceramic coating over PPF to make washing a black car easier.
How much does RS6 PPF cost in Dubai?
Full body PPF starts from AED 12,000 for sedans and AED 13,500 for SUVs and trucks, depending on options, before 5% VAT. Send your car details on WhatsApp for an exact quote. See also the RS6 Nardo Grey colour PPF and our Audi PPF services.
Frequently asked questions
What did Apex Detail Studio do to this RS6?
We washed, decontaminated and polished the paint, then fitted paint protection film panel by panel, including the gloss black trims.
Why polish before PPF?
Film locks in whatever is underneath, so polishing first means swirls are removed before the paint is covered.
Can gloss black trim be protected?
Yes. Gloss black pillars and window trims scratch easily and film protects them well.
How much is RS6 PPF in Dubai?
Full body PPF starts from AED 12,000 for sedans and AED 13,500 for SUVs and trucks, depending on options, before 5% VAT.
How long does PPF take on an RS6?
Usually a few days for full body, including prep. The team confirms timing with your quote.
Is PPF worth it on a daily driven car?
Yes. Daily cars collect the most chips and wash swirls, and film keeps the paint looking new while it takes that wear.
Does PPF stop swirl marks on black paint?
It helps a lot. The film takes the wash marks instead of the paint, and its self healing top coat lets light swirls fade with heat.
Protect your Audi
Send your car details on WhatsApp or call the studio, and the team will reply with film options and a quote.
WhatsApp ApexCall +971 58 549 2739
Apex Detail Studio, 6A Street, Al Quoz Industrial 3, Dubai · Saturday to Thursday, 10am to 7pm
