This Tesla Cybertruck Cyberbeast went from raw stainless steel to a complete satin black finish at Apex Detail Studio, with full-body premium PPF Stealth paint protection film over every panel, bumper and body line. The prep included a wash, decontamination and surface correction, and the window glass was tinted too. The result is a fully blacked-out Cyberbeast with its steel protected underneath. If you want Cybertruck stealth PPF in Dubai, this build shows every stage on the exact truck.
Jump to section · 9 parts
- What was done to this Cybertruck Cyberbeast?
- Why does stainless steel need protecting?
- How did Apex Detail Studio wrap the Cyberbeast?
- Was window tint fitted too?
- Watch the full Cyberbeast build
- Why is prep so important on a Cybertruck?
- How much does stealth PPF cost on a Cybertruck in Dubai?
- Frequently asked questions
- Black out your Cybertruck at our Al Quoz studio
Job card
- Car: Tesla Cybertruck Cyberbeast, stainless steel.
- Service: full-body premium PPF Stealth PPF, colour change to satin black.
- Prep: wash, decontamination and surface correction.
- Also: window tint, shown in the video.
- Where: Apex Detail Studio, Al Quoz, Dubai.
Get a Cybertruck PPF quote
Send your Cybertruck details and the finish you want on WhatsApp, and the team will reply with options and a quote.
What was done to this Cybertruck Cyberbeast?
Every panel, bumper and body line of the Cyberbeast was wrapped in satin black premium satin PPF, turning the raw stainless steel black.
The film changes the look and protects the steel at the same time, since stainless steel cannot be polished like a clear coat. We have also done a gloss black Cybertruck and a green Cybertruck if you want to compare finishes.
Why does stainless steel need protecting?
The Cybertruck body is unpainted stainless steel. Many owners assume that means it needs no protection, but the bare finish has its own problems. It shows fingerprints, water marks and smudges, it can pick up surface marks from grit and stones, and scratches in raw steel cannot simply be polished out like paint. In Dubai, where sand and dust are always in the air and the truck is often parked in the sun, keeping that finish clean is a daily job.
Film solves both problems at once on this Cyberbeast. Premium satin PPF covers all panels, bumpers and body lines, protecting the steel from marks and scratches, and its satin finish turns the truck from raw stainless to a complete satin black. As the video puts it, this is paint protection and colour change in one.
How did Apex Detail Studio wrap the Cyberbeast?
We washed and decontaminated the steel, cut the film on the plotter, then laid large satin black sheets panel by panel.
- Wash and decontamination. The truck was foam washed and the steel cleaned.
- Pattern cutting. Film was cut on the plotter.
- Installation. Teams laid large sheets over the doors, bed sides, bonnet and tailgate and squeegeed them flat.
- Edges. Edges were wrapped and trimmed around lights, handles and the light bar.
- Tint and inspection. Window tint was fitted and the finish checked under studio lighting.
Our installation process guide explains each stage.
Step by step on this Cyberbeast
These stills come from the full build video further down the page, so every photo shows this exact car in our Al Quoz studio.
Was window tint fitted too?
Yes. The video shows tint being heat-shaped and fitted to the Cyberbeast glass.
Our UAE window tinting guide explains the legal limits.
Watch the full Cyberbeast build
The full job on our YouTube channel.
Why is prep so important on a Cybertruck?
Raw stainless steel holds onto oils, fingerprints and fine contamination, and anything left on the surface would be sealed under the film. Before the Stealth film went on, this Cyberbeast was decontaminated and the surface corrected, so the film bonded to a perfectly clean finish. The Cybertruck panels are large and flat with sharp body lines, which makes edges and alignment very visible on a satin black finish. Our PPF installation process page explains each step we follow.
How much does stealth PPF cost on a Cybertruck in Dubai?
Full-body PPF at Apex starts from AED 13,500 for SUVs and trucks, depending on options, before 5% VAT; stealth film and the Cybertruck’s size are priced on top, so send your details for an exact quote.
Our PPF cost guide for Dubai explains what affects the price.
Thinking about a new colour for your car? See every colour change we have done, the finishes and prices on our colour PPF in Dubai page.
Frequently asked questions
What did Apex Detail Studio do to this Cyberbeast?
We wrapped it in full-body premium PPF Stealth PPF, turning the stainless steel satin black, and tinted the windows.
Is the satin black finish reversible?
Yes. The film can be removed professionally and the stainless steel is underneath.
Does stealth PPF protect the stainless steel?
Yes. It absorbs scratches and scuffs that would otherwise mark the steel.
How do I wash a satin black Cybertruck?
Hand wash with a pH-neutral, matte-safe shampoo and avoid wax and glossy sprays.
How much does stealth PPF cost on a Cybertruck in Dubai?
Full-body PPF at Apex starts from AED 13,500 for SUVs and trucks, depending on options, before 5% VAT, with stealth film and size priced on top.
How long does the job take?
A few days including prep, film and tint. We confirm timing when we quote.
Black out your Cybertruck at our Al Quoz studio
See satin film on your own truck and get a clear scope before any work begins.
WhatsApp ApexCall +971 58 549 2739
Apex Detail Studio, 6A Street, Al Quoz Industrial 3, Dubai · Saturday to Thursday, 10am to 7pm
