Tesla Cybertruck Colour PPF in Dubai: Stainless Steel to Green, Plus Tint

Quick answer: This Tesla Cybertruck went from bare stainless steel to green at Apex Detail Studio, using full colour-change PPF over the body panels. It was paired with premium window tint for a complete transformation, inside and out. Because the Cybertruck has no paint, the film gives it a colour it never had from the factory, while covering the steel with a self-healing layer. Colour PPF and tint are quoted per car after inspection.

Every Cybertruck leaves the factory the same colour, because it has no paint at all. Its body is an exoskeleton of brushed stainless steel, which is tough, but it shows fingerprints and smudges, and there is no factory option to change it. For owners who want their truck to look different from every other Cybertruck on Dubai roads, film is the practical answer.

Our reel caption put it simply: one Cybertruck, completely different presence. This truck went from stainless steel to green with full colour-change PPF, and the glass was finished with premium window tint. Here is how and why.

What was done to this Cybertruck?

The stainless steel body panels were covered in green colour-change PPF, and the windows were fitted with premium window tint.

Get a Cybertruck quote
Pick your model and the services you want in the Apex estimate builder, or send photos on WhatsApp.

Build my estimate

Why colour PPF on a stainless steel truck?

Because there is no paint to respray. Painting stainless steel is a major and permanent job, while colour PPF changes the look without altering the metal underneath. The film can be removed later, returning the truck to its factory steel finish.

Film also helps with day-to-day ownership. Bare stainless steel picks up fingerprints, water spots and marks easily, and scratches in the brushed finish are hard to correct. A self-healing film takes those marks instead. Our Cybertruck PPF guide compares clear, satin and colour film options, and colour PPF vs vinyl wrap explains why film beats a wrap for protection.

What makes the Cybertruck different to wrap?

Its shape. The Cybertruck is built from large, flat, angular panels with sharp creases, which sounds easy but leaves nowhere to hide an imperfect line. Every seam and edge is visible on a flat surface, so panel planning matters more than on a curvy car.

The truck is also big, with a long bed and tonneau area, and it has sensors and cameras that must stay clear. Planning the film around all of this, so that edges sit cleanly and the steel does not show at the gaps, is the bulk of the work. The tint adds a second job on the glass, and the shade has to stay within UAE rules.

How did Apex Detail Studio carry out the transformation?

1. Inspection. We checked the steel panels, any existing marks and the sensor and camera locations.
2. Deep clean and decontamination. The stainless steel was cleaned and degreased so the film bonds properly.
3. Panel planning. Film layout was planned around the flat panels and creases, keeping seams to a minimum.
4. Film installation. The green film was laid panel by panel, with edges wrapped wherever safe so no steel shows.
5. Window tint. Premium tint was fitted to the windows once the film work was complete.
6. Final inspection. Every edge, seam and window was checked under studio lighting before handover.

How much does colour PPF and tint cost on a Cybertruck?

Colour PPF and window tint are both quoted per car after inspection. The colour, the size of the truck and the amount of edge work all change the scope, and a Cybertruck is a large vehicle with big panels. For reference, clear full-body PPF at Apex starts from AED 11,000 depending on the film, before 5% VAT, rising for larger vehicles.

Send your truck’s details on WhatsApp for a first figure. Our PPF price guide explains what drives the price, and our guide to tint for Teslas covers film choice for EVs.

How should a filmed and tinted Cybertruck be looked after?

• Hand wash with a pH-neutral shampoo and rinse sand off first.
• Keep pressure-washer nozzles away from film edges and panel seams.
• Do not roll the tinted windows down for the first few days after installation.
• Clean tinted glass with a soft cloth and an ammonia-free cleaner.
• Book a periodic check of film edges, especially around the bed and tonneau.

Our new tint aftercare guide covers the first days after tinting. In the UAE the registered colour is expected to match the vehicle, so confirm with the RTA whether your registration needs updating after a colour change.

Frequently asked questions

What did Apex Detail Studio do to the Cybertruck?

The stainless steel body was covered in full green colour-change PPF, and the windows were fitted with premium window tint. The result is a complete transformation, with the original steel left untouched underneath.

Can you change the colour of a Tesla Cybertruck?

Yes. The Cybertruck has no paint, so colour-change PPF is the practical way to give it a new colour. The film also protects the steel and can be removed later.

Is colour PPF removable from stainless steel?

Yes. A professional installer can remove the film, returning the truck to its factory stainless steel finish. Nothing about the change is permanent.

How much does a Cybertruck colour change cost in Dubai?

Colour PPF and tint are quoted per car after inspection, because colour, size and edge work all affect the scope. Send your truck’s details on WhatsApp to +971 58 549 2739 for a first figure.

How dark can Cybertruck tint be in the UAE?

As widely reported, private vehicles can generally have up to 50% tint on the side and rear windows, and the windscreen must stay clear unless an official exemption is approved. Confirm the current rules before installation.

Does a colour change need to be registered with the RTA?

The registered colour is expected to match the vehicle in the UAE. Rules can change, so confirm with the RTA whether your registration needs updating and keep the workshop invoice.

From our reel on Instagram, 1 September 2026.