This Porsche 911 GT3 RS with the Weissach Pack received a full premium paint protection package at Apex Detail Studio in Dubai, topped off with windshield protection film. We used premium gloss PPF with the DAP precut method, giving total coverage without removing any parts. Full body PPF starts from AED 14,000 for supercars, depending on options, before 5% VAT.
Jump to section · 10 parts
- What was done to this Porsche 911 GT3 RS Weissach?
- Why does a GT3 RS take more stone chips than most cars?
- What is the DAP precut method?
- Why add windshield protection film?
- Watch the full Porsche GT3 RS Weissach PPF build
- How did the GT3 RS look when it was finished?
- How do you look after a GT3 RS after PPF?
- How much does GT3 RS PPF cost in Dubai?
- Frequently asked questions
- Protect your Porsche
Job card
- Car: Porsche 911 GT3 RS, Weissach Pack, silver with magnesium wheels.
- Service: full premium paint protection film package.
- Film: Premium gloss PPF, DAP precut, no parts removed.
- Also: windshield protection film.
- Where: Apex Detail Studio, Al Quoz, Dubai.
Get a GT3 RS PPF quote
Send your Porsche model and year on WhatsApp, and the team will reply with film options and a quote.
What was done to this Porsche 911 GT3 RS Weissach?
The GT3 RS Weissach received a full premium paint protection package with premium gloss PPF, plus windshield protection film.
The GT3 RS is built for the track, with a wide front, deep vents and a large rear wing. It takes stone chips and track debris at speed, and the exposed carbon of the Weissach Pack needs protecting as well. For other GT3 builds, see the GT3 Touring PPF and the 992 GT3 PPF.
Why does a GT3 RS take more stone chips than most cars?
The GT3 RS is built around aerodynamics. Its front end is low and wide, with large intakes, a deep splitter and vents cut into the bonnet and front wings, and the huge rear wing and side intakes sit right in the path of debris thrown up by the front tyres. Add sticky track tyres that pick up and fling small stones, and the RS collects chips faster than almost any road car.
A full body package covers all of that, not just the nose. The film takes the chips on the bumper, bonnet, wings, sills and the leading edges of the rear arches, so the silver paint stays clean whether the car is used on the road or on track. Our guide to track day PPF explains which areas matter most.
What is the DAP precut method?
DAP is the manufacturer’s pattern software. Each panel is cut on a plotter to the exact shape of the car, so the film can be fitted with full coverage without removing parts like bumpers, lights or the wing. Read more in what is precut DAP.
Step by step, this is how the GT3 RS was done:
Step by step on this Porsche 911 GT3 RS Weissach
These stills come from the full build video further down the page, so every photo shows this exact car in our Al Quoz studio.
Why add windshield protection film?
A track car with a steep windscreen catches stones from the cars ahead. Windshield film absorbs those hits and helps stop chips and cracks, protecting an expensive glass part.
Step by step on this Porsche 911 GT3 RS Weissach
These stills come from the full build video further down the page, so every photo shows this exact car in our Al Quoz studio.
Watch the full Porsche GT3 RS Weissach PPF build
The video walks round the GT3 RS Weissach and follows the precut film and windshield protection going on.
How did the GT3 RS look when it was finished?
The GT3 RS kept its factory finish and carbon look, with protection on the paint, carbon and windshield.
Inside the cabin
The Weissach cabin, roll cage and bucket seats.
How do you look after a GT3 RS after PPF?
- Wait about a week before the first wash or track day so the film can settle.
- After a track day, wash off rubber pick up and brake dust quickly so it does not bake on in the heat.
- Hand wash with a pH neutral shampoo and avoid brush car washes.
- Keep pressure washer nozzles away from film edges around the vents and aero parts.
- Check the film on the front end after hard track use, and let the team replace any panel that has taken a heavy hit.
How much does GT3 RS PPF cost in Dubai?
Full body PPF starts from AED 14,000 for supercars, depending on options, before 5% VAT. Windshield film is quoted on top. Send your car details on WhatsApp for an exact quote. See also our track day PPF guide.
Porsche 911 guides
Frequently asked questions
What did Apex Detail Studio do to this GT3 RS Weissach?
We fitted a full premium gloss PPF paint protection package using DAP precut patterns, and added windshield protection film.
Were any parts removed for the PPF?
No. The DAP precut method gave total coverage without removing any parts.
What is windshield protection film?
It is a clear film for the windscreen that absorbs stone hits and helps prevent chips and cracks.
Does PPF protect carbon parts on a Weissach?
Yes. Film protects exposed carbon from chips and UV.
How much is GT3 RS PPF in Dubai?
Full body PPF starts from AED 14,000 for supercars, depending on options, before 5% VAT. Windshield film is quoted separately.
Is PPF worth it for track days?
Yes. Track debris and stones at speed are exactly what film is designed to stop.
Can damaged film be replaced on one panel?
Yes. If a panel of film takes a heavy hit, for example after a track day, that piece can be removed and replaced without touching the rest of the car.
Protect your Porsche
Send your car details on WhatsApp or call the studio, and the team will reply with film options and a quote.
WhatsApp ApexCall +971 58 549 2739
Apex Detail Studio, 6A Street, Al Quoz Industrial 3, Dubai · Saturday to Thursday, 10am to 7pm
