This Mansory P720 came to Apex Detail Studio in Al Quoz, Dubai, for XPEL Ultimate Plus paint protection film. We inspected and corrected the paint, cut the film from XPEL DAP precut patterns and fitted it with full tuck-in edges and no blade on the paint, so the Mansory supercar PPF is close to invisible. Full-body PPF starts from AED 12,000 for sedans and AED 13,500 for SUVs and trucks, depending on options, before 5% VAT.
Job card
Jump to section · 8 parts
- What did we do to this Mansory P720?
- Why choose XPEL Ultimate Plus PPF on a Mansory supercar?
- How was the PPF installed on the Mansory P720?
- What makes PPF harder on a high-performance car?
- What does the finished Mansory P720 look like?
- How much does PPF cost on a Mansory P720?
- Frequently asked questions
- Bring your supercar to Apex
- Car: Mansory P720.
- Service: paint protection film.
- Film: XPEL Ultimate Plus, 8 mil thick, clear gloss, self-healing and hydrophobic.
- Method: XPEL DAP precut patterns, blade-free installation, full tuck-in edges.
- Prep: full paint inspection, polishing and correction, cleaning and decontamination.
- Finish: final inspection and quality check.
- Where: Apex Detail Studio, Al Quoz, Dubai.
Protect your Mansory
Send your car’s model and colour on WhatsApp and we will recommend the right XPEL film and coverage.

What did we do to this Mansory P720?
We protected this Mansory P720 with XPEL Ultimate Plus paint protection film, fitted from DAP precut patterns with fully tucked edges and no blade on the paint. Before installation the paint was inspected, polished and corrected so the film sealed in a flawless finish.
A Mansory build is not a car you can repaint casually. The bodywork is bespoke, the shapes are aggressive and the finish is part of what makes the car rare. Protecting it with film from day one means chips, scratches and stains land on a replaceable layer rather than on the paint the car was delivered with.
It is not our only Mansory. We have also protected a Mansory Pugnator with XPEL PPF, one of only seven cars of its kind, and a Mansory Cullinan Linea d’Oro.
Why choose XPEL Ultimate Plus PPF on a Mansory supercar?
XPEL Ultimate Plus suits a Mansory because it protects against rock chips, scratches and abrasions while keeping, and even enhancing, the original gloss. At 8 mil thick, it is a real physical barrier, and its top layer heals minor swirls and scratches with heat.
- Self-healing: light swirls and scratches fade when the film warms up, which happens quickly in Dubai sun.
- Stain resistance: road tar, bird droppings and harsh environmental exposure sit on the film, not the paint.
- Hydrophobic surface: water and dirt bead off, so the car stays cleaner and washes more easily.
- Clear gloss: the bespoke paint and its colour stay exactly as Mansory finished them.
In Dubai the case is simple. Heat above 45C, strong UV, sand on the roads and frequent washing all wear paint down. A supercar with low, wide bodywork takes more than its share of debris from the cars in front. Read more about the film in our XPEL Ultimate Plus guide.
How was the PPF installed on the Mansory P720?
We followed a five-step process: paint inspection and correction, DAP precut design, surface preparation, precision application and a final inspection. The key is that every piece of film was cut by the plotter from XPEL’s Design Access Program, so no blade ever touched the paint.
- Inspection and correction. We inspected the paint under studio lighting, then polished and corrected it to remove imperfections before they could be sealed under the film.
- DAP precut design. XPEL’s DAP software maps the film to the car’s curves, and the patterns were matched to this car’s specification, so no manual trimming was needed.
- Surface preparation. The car was cleaned and decontaminated to prevent dust and bubbles under the film.
- Precision application. Each panel was laid by hand with full tuck-in edges and no blade contact, for a nearly invisible finish.
- Final inspection. Every edge and panel was checked for quality before handover.
You can read how precut patterns work in our guide to DAP precut PPF.
What makes PPF harder on a high-performance car?
High-performance cars have complex body curves, deep recesses and aggressive aerodynamics, which make the film harder to fit invisibly and harder to keep from lifting. A Mansory body adds even more of these shapes.
The main challenges are keeping the film invisible with no visible edges, protecting delicate paint from manual cutting, and making sure edges in tight recesses stay down over time. Precut patterns and full tuck-in edges answer all three: the film is shaped before it reaches the car, the edges wrap out of sight, and there is no knife on the paint. Installation happens in our temperature-controlled bays, which keeps dust out and helps the adhesive behave consistently.
What does the finished Mansory P720 look like?
The finished P720 looks as Mansory delivered it, with deep gloss and no visible film lines. The corrected paint under the film is cleaner than when the car arrived, and the film’s hydrophobic top layer makes it bead water and shed dust.
Owners can add further protection on top. Options we offer include ceramic coating over the PPF for extra gloss and easier washing, interior detailing for leather, Alcantara, carbon fibre and trim, wheel and brake caliper protection against brake dust, and window tinting with XPEL Prime XR Plus films for UV protection and privacy.

How much does PPF cost on a Mansory P720?
Full-body PPF at Apex starts from AED 12,000 for sedans and AED 13,500 for SUVs and trucks, depending on options, before 5% VAT. A Mansory P720 is quoted individually, because its bespoke bodywork, the coverage you choose and the paint correction it needs all change the work involved.
XPEL film carries a manufacturer warranty, and our team explains the terms when you book. For ceramic coating, tint and detailing added to the same visit, pricing depends on the car and the package; send your car details on WhatsApp to +971 58 549 2739 for an exact quote.
Frequently asked questions
What is DAP precut PPF?
DAP is XPEL’s Design Access Program. Its software maps film patterns to each car’s shape, so the film is cut on a plotter instead of with a blade on the paint.
Is XPEL Ultimate Plus a good film for a Mansory?
Yes. It is an 8 mil, self-healing, hydrophobic clear film that protects against chips, scratches and stains while keeping the original gloss.
Will PPF show on a Mansory’s complex body?
Not when it is fitted properly. Precut patterns and full tuck-in edges keep the film edges out of sight on curves and recesses.
Do you polish the paint before fitting PPF?
Yes. We inspect and correct the paint first, so the film seals in a clean finish rather than old swirls.
Can I add ceramic coating over PPF on my supercar?
Yes. Ceramic coating over the film adds gloss and makes the car easier to wash.
Have you protected other Mansory cars?
Yes. We have also protected a Mansory Pugnator with XPEL PPF and a Mansory Cullinan Linea d’Oro.
Bring your supercar to Apex
Message us on WhatsApp at +971 58 549 2739 or visit 6A Street, Al Quoz Industrial 3, Dubai.
WhatsApp ApexCall +971 58 549 2739
Apex Detail Studio, 6A Street, Al Quoz Industrial 3, Dubai · Saturday to Thursday, 10am to 7pm




